We would like to build a wall mounted vanity in a new bathroom.? - how to build wall mounted bookshelves
It will deal with tile on the side, mounted on a sink and tap the wall.
My biggest concern is the construction of vanity and details of how it attaches to the wall, so there will be no visible means of support in order to give the impression to float freely. I've heard that might help some other similar systems InWall the toilet wall.
The vanity size is 40 cm wide and 20 deep. It would also be a platform to interest under the counter.
Saturday, January 16, 2010
How To Build Wall Mounted Bookshelves We Would Like To Build A Wall Mounted Vanity In A New Bathroom.?
4 comments:
May or may not lock in the region where you want to fasten the vanity to the wall. You should be able to verify this with a stud finder or by drilling small holes in the wall. With a stud finder should also be on the wall studs to. They are usually on 16-inch centers.
Must in each case, with a width of 40 inches, vanity, at least two portions of 2 x 4 coverage, because you need 16-inches in places .. This should be sufficient to support a sink and vanity with tiled worktop.
I want to build the vanity and with a frame of 2 x 4 support at the rear and Tornio, which is mounted on the wall. I would use 1 / 4 inch or 3 / 8 inch lag screws at least 3 1 / 2 inches long with washers to keep the lag screw head and to succumb to 2 x 4.
Remember, you have vertical height of vanity, are sufficient to attract the piping hide under the sink or plumbing plan.
May or may not lock in the region where you want to fasten the vanity to the wall. You should be able to verify this with a stud finder or by drilling small holes in the wall. With a stud finder should also be on the wall studs to. They are usually on 16-inch centers.
Must in each case, with a width of 40 inches, vanity, at least two portions of 2 x 4 coverage, because you need 16-inches in places .. This should be sufficient to support a sink and vanity with tiled worktop.
I want to build the vanity and with a frame of 2 x 4 support at the rear and Tornio, which is mounted on the wall. I would use 1 / 4 inch or 3 / 8 inch lag screws at least 3 1 / 2 inches long with washers to keep the lag screw head and to succumb to 2 x 4.
Remember, you have vertical height of vanity, are sufficient to attract the piping hide under the sink or plumbing plan.
They are characterized by a very strong support wall, which is actually invisible when completely installed. I can not help with the details, but at the Macworld. Com, as available. Byee
They are characterized by a very strong support wall, which is actually invisible when completely installed. I can not help with the details, but at the Macworld. Com, as available. Byee
Post a Comment